How to Resolve 4 Major Maintenance Problems of Cooling Towers?

The cooling system’s reliability, equipment, and operating costs, and operational efficiency are affected by the quality and the cooling tower water treatment. Here are four of the basic issues that every cooling maintenance could undergo and their solutions: 

Corrosion 

One of the main cooling tower problems that should be addressed properly is corrosion. Sadly, this problem is usually ignored and overlooked because many believe that this reaction is only normal particularly for those aged cooling towers. However, if corrosion is left untreated, it could worsen and fester. If this occurs, repairs won’t be sufficient. You might be needed to change parts or maybe replace the whole cooling tower itself. Know that replacing the damaged parts or replacing the whole cooling tower isn’t just very expensive, it could possibly put other areas at risk within the cooling system. This could affect your operation, which leads to more losses. 

Solution: 

Thankfully, there are ways you can do to prevent your cooling tower to be corroded. With regular inspections, you can determine minimal problems that could cause corrosion. Extremely small problems such as small water leakage and scale build-up from a closed-loop system shouldn’t be neglected since they could activate further damages and corrosion. 

Scaling 

Scaling could build up over time and this could damage the pipes, internal surfaces, and the cooling system itself. Also, scaling could minimize cooling tower efficiency and minimizes heat dispersal as it increases the consumption of energy. 

Solution: 

The most efficient solutions for cooling system scaling include: 

  • pH control 
  • Chemical scale inhibitors 
  • Feedwater treatment 
  • Circulation side-stream filtration 
  • Blowdown monitoring and concentration cycles. 

Fouling 

This issue is basically known as the development of deposits or unwanted materials on a solid surface. In cooling towers, the causes of fouling aren’t just restricted to debris, dust, and dirt. It could also be due to other materials—both non-living and living ones—such as sand, migratory corrosion products, biological contaminants, microbiological development, suspended and colloidal solids, and silt. Fouling is just like scaling, however, its deposits are less hard compared to scaling. 

Solution: 

  • Side-stream filtration 
  • Periodic blowdown 
  • Chemical dispersants 
  • Close and regular monitoring 

Microbiological contamination 

Biological/microbiological contamination is the unintentional or accidental introduction of microbes such as yeast, mold, toxins and protozoa by-products, bacteria, algae, and fungi within the cooling system. Microorganisms could reach the cooling system in 2 ways. It could either be through the inflow of water or the air that passes through the tower. Process leaks, water use, and water evaporation could all boost the water’s nutrient content that’s utilized on an evaporative cooling tower. With warm water and a lot of nutrient supply, the cooling system gets a perfect environment and a breeding ground for pathogenic microorganisms as they survive and develop.  

Solution 

Controlling the development of microbes within the system, particularly fungi, algae, and bacteria is the greatest means of solving the problem. 

If you want to know more about the solutions to such cooling tower issues, visit International Cooling Tower now! 

Things You Could Expect in a Good Lawyer

Lawyers are professionals that could help you in a variety of ways. Whether you want to sell or buy a certain house or any type of property, you are criminally charged about anything, or you are a businessman who needs legal opinions on business contracts, a good lawyer could always lend his or her ears and legal advice to help. Therefore, in order to solve your legal problems, you need to be hiring a good lawyer that would be with you in the battle. 

However, choosing the right who has all the good qualities such as DUI Lawyers Tampa is a hard task to fulfill. If you have already fixed your mind and decided to hire a specific lawyer, then you are good to go. But, you need to see the following traits to the lawyer that you have hired in order to ensure that indeed, the person that you paid for their services is worth the price: 

1. Communication 

One of the traits that a good lawyer should have is a communication skill. A lawyer will be the one who is going to represent you in your legal battle and of course, you need to make sure that that lawyer could convey your defense or your complaint in the most persuasive manner. Apart from this, you need to make sure that the lawyer that you have hired could be easily talked to, especially if you want to build a case based on the line of thinking that you would want your lawyer to be using.  Thus, when you could see that the lawyer you hired has a good communication skill, then you are in good hands.  

2. Decision-Making 

Judging a certain scenario and deciding out of this judgment are the things that you want to see in a good lawyer. And this does not only mean that a lawyer should judge based on his or her instincts, it should be backed with solid evidence in order to win a specific case. Or perhaps if your lawyer is helping you with your business contracts, you need to see to it that the lawyer always decides an action always in favor of you. Through this, you can really say that the lawyer that you have hired is indeed competitive.  .

3. Analysis 

Another important trait that you should expect your lawyer to have is his or her analytical skills. There are legal problems that are super complex and therefore, in order to get you out of the situation, your lawyer should be able to analyze the movements that you could do in order to ensure that you end up being victorious in the case or any other legal action that you are going to make. Thus, in hiring one, you need to make sure that the lawyer that you have hired could easily analyze, understand, and present solutions for your problems.  

Determining whether or not a lawyer is good or bad could be very tricky. However, if you could see the abovementioned traits in the lawyer that you have hired, then you are in the right path. 

How to Protect Your Water Well During Flooding?

If you’re a homeowner with private water well, one of your concerns is flooding. Drinkable water is a vital resource that might be contaminated during a natural calamity. The first step towards restoring the impacted area’s stability is to reestablish supplies after a flood. 

On a couple of occasions, residential water well can be quickly fixed to operate again. Typically, aquifers are a safe source of water since they are protected naturally from the impacts of flooding. While your aquifer might be safe, you should not use your well for drinking if it’s flooded. You need to have it tested first.  

If needed, a professional might treat it to get rid of any harmful particles. Since a couple of negative effects might not be felt right away, testing should be done a couple of weeks after.  

Before you hire a professional for Geotechnical Drilling, here are a couple of things to do to protect it during flooding: 

Water Well Equipment 

All residential wells utilize electricity to operate the well pump. Usually, these pumps are either housed above ground (Jet Pumps) or submerged deep in the well (Submersible Pump). Before you restart any electrical equipment, there are a couple of things you should do if the equipment has been submerged or the power has failed: 

  • Oftentimes, power failures are associated with natural disasters, such as flooding. Before you hook your pump to the generator, there are a couple of safety guidelines you’ve got to follow if you’ve got a backup generator. 

Before you connect to the generator, you’ve got to disconnect the well pump from the power source. This will help prevent possible electrical issues. The work will need a professional technician unless the connection has been previously made. This is particularly true if it’s a 3-phase pump. You should not run a generator indoors. 

  • Your well has potentially not been affected by debris if it has a cap that’s fitted properly and screened vent. Also, it has likely received tiny bits of debris. But, you have to disconnect it, let it dry, and clean it if you’ve got an above-ground jet pump that has been flooded.  
  • You have to disconnect them, let them dry, clean them, and examine them before you restart the pump if any electrical components were flooded.  

Water Quality 

The quality of the water might take time to recover after flooding. This varies on the situation.  

  • There can be a temporary increase in chloride and sodium levels if you live in a sea coast location and the flooding is a result of a tidal surge.  
  • Excessive aquifer recharge may dangerously increase water levels, even if the well head wasn’t submerged. This will put your groundwater in contact with the soil’s contaminants.  
  • High flood waters can cause surface water to be contaminated by damaged fuel lines, sewage entering the aquifer, or damaged storage tanks. If this is the case, you should contact a professional right away and avoid using the water until it has been tested and treated.